XNUMX. The worm gear reducer is overheated
Causes of failure: overloaded carrying; too little or too much lubricating oil; poor or inappropriate lubricating oil; excessive friction of the oil seal; improper connection between the output shaft and the transmission device, etc.
Elimination method: adjust to appropriate load or select a large model; add appropriate lubricating oil according to the instructions; add appropriate lubricating oil after the oil is discharged; drop a few drops of lubricating oil on the oil seal; adjust to an appropriate position.
XNUMX. Noise of worm gear reducer
Causes of failure: poor meshing of worm gear and worm; bearing damage or excessive clearance; insufficient lubricating oil; foreign matter intrusion.
Elimination method: trim the tooth contact surface; replace the bearing; add a proper amount of lubricating oil as instructed; remove foreign matter and replace the lubricating oil.
XNUMX. Abnormal vibration
Causes of failure: poorly fixed transmission; worn or damaged worm gear; worn or damaged bearing; loose bolts; foreign matter intrusion.
Remedy: fix the transmission device; replace the worm gear; replace the bearing; tighten the bolts; remove foreign objects and replace the lubricating oil.
XNUMX. Excessive wear of worm gear of worm gear reducer
Causes of failure: over-load operation; poor or inappropriate lubricating oil; insufficient lubricating oil; bearing wear; operating temperature is too high.
Remedy: adjust to proper load; replace proper lubricating oil; add proper lubricating oil as instructed; replace bearing; improve ventilation environment.