Small Precison Worm Decrease Gearboxes
There are many of specifications you will need to consider when making a worm gearbox selection.
First, what’s the insight and output torque requirements? Next, verify vendor horsepower/torque charts and pick the correct worm gear reducer.
If how big is the gearbox will probably be an important consideration then check the reducer dimension specs, not all producers make compact units. In fact, working with the proper supplier can help you not merely find the right equipment reducer but also prevent some of the most typical mistakes in reducer selection. We offer a free guide to help you find the appropriate supplier to work with.
For low and fractional horsepower application you can expect two sizes of worm equipment reducer, the SW-1 and the SW-5. Size and torque output will be the major variations between both of these models. Both feature either a hollow or solid output shaft. Both versions are compact and offer users a wide variety of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specs of your particular application or task is vital to selecting the right worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Small precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped installation holes on top and bottom
• Flush fitting bearing caps easy to install
• Input shafts installed on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capability of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Right Angle Worm Gear Motors Used
Anywhere a concise dual shaft gear motor or single shaft gear motor is required. This right angle equipment motor is so versatile it can work just about anyplace.
Features & Options
Double Shaft or Solitary Shaft
Hollow Shaft
Maximize Torque in a little Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power offers designed and built exclusive, high accuracy mini gearboxes that can’t be found somewhere else. Our miniature gearboxes can be found in many configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide custom micro gearboxes that were created and created to meet your specific specifications.
Contact us for the mini gearbox the application requires, or ask for a quote on a custom micro gearbox.
Micro Gearbox Options
Gearboxes are also called reducers, gear reducers, swiftness reducers, gear drives, and gearmotors. All terms can be used more or less interchangeably. Please be aware that the links for our little gear drives include info on the full selection of body sizes for that series or style.
Bevel Box Micro Equipment Drive
Our bevel container miniature gear drives are program rated for the the best balance of functionality and cost. Torque could be balanced to meet up your RPM and working life requirements. Lightweight with low backlash efficiency (as little as 1°, with option of 1/2”).
Result torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input boosts to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high levels of thrust in a concise package. They offer an result shaft at 90° from the input, and are obtainable in gear ratios from 1:1 to 40:1. Lightweight but long lasting, with machined aluminium housings and hardened alloy steel gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: only ≤30 arc minutes
Rated for input speeds up to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc moments of backlash or better. Also known as “shaft to bore gearboxes,” these devices provide a single insight shaft that protrudes from reverse sides of the casing; output is certainly a keyed bore. Standard one- and double-end shafts can be found and given keys and retainer bands. An array of equipment ratios and input sizes can be found to meet your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Available in ratios from 5:1 to 120:1
Rated for input speeds up to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened steel gears, solid aluminium housings, and long lasting lubrication. They offer two input shafts on opposite sides of the framework, with two result shafts perpendicular to the insight shafts. Our mini 4 shaft worm gear drives deliver high effectiveness performance with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: as little as ≈2°
Available with gear ratios from 1:1 to 32:1
Rated for input boosts to 4,000 RPM
Miniature Flange Worm Gear Drive
These micro flange worm gearboxes produce an output at 90° from the insight. They deliver superior functionality in an amazing array applications and are built with little footprints, making them perfect for functions where space is limited. They offer high performance with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: only ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specifically engineered for encoder applications, Ever-Power’ micro inline spur gear drives can be found in two frame sizes, and are rated for boosts to 3,000 RPM. Aluminum housings and stainless gears and shafts make these inline spur gearboxes difficult and corrosion resistant, for your most demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: less than 15 arc minutes
Available with gear ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature right angle worm equipment reducers deliver superior performance with high efficiency, and feature rugged construction for challenging power transfer operations. Available in three equipment ratios (5:1, 10:1, 20:1), our small worm gearboxes are built in extremely compact footprints for applications where space is bound.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Small footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power may engineer and produce a customized miniature gearbox to meet up your unique specifications. We can produce custom micro gearboxes in virtually any configuration the application requires, with output torque levels as high as 900Nm. We are able to work from your gearbox styles, reverse engineer a preexisting unit, or assist you to develop an all-new style that provides the performance you need. Ask for a quote on a customized miniature gearbox or e mail us to discuss your specific requirements.
The Ever-Power Advantage: Little is No Big Problem
Broadest selection of small gear reducers
Greased for life
Ruggedly built
Modifications and particular ratios available
Custom small gearboxes made to suit
Input & Output Shafts
Input and output shafts with drive essential and retainer rings could be supplied to your specifications for any of our hollow bore miniature gearboxes. We offer a basic selection of single ended or double ended shafts to assemble in these gearboxes. All gearbox shafts are supplied with keys and retainer bands.
For P and PF series worm and wheel gearboxes use our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our Electronic gearbox shafts.
For F series spur gearboxes, contact our app engineers to discuss your particular needs.
We offer a broad selection of misalignment shaft couplings in inch and metric bore sizes. In . and metric precision surface shafts can be found from stock.
Contact Us for High Performance Miniature Gearboxes
We are the miniature gearbox experts. Our micro gear drive models deliver superior performance in a small footprint, and are tough enough for challenging work environments. Contact us to learn more about our mini gearboxes, or demand a quote on a customized model that’s tailored to your preferences.
Additional benefits of worm drive gearboxes include: