Worm get gearbox with motor
worm motor
A robust worm-get gearbox powered by an MM28 motor. Ideal applications where a simple to fit, high torque output is required. Great for student based jobs which includes robots and buggies.
The unit has been designed so that the output shaft can be ‘clicked’ in and out for modification. Electronic.g. reducing to size. The engine is snap installed into its cradle to activate the gear and worm.
Details
1 – 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + motor: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine isn’t turning. The high equipment ratios of 216:1 or 336:1 get this to gearbox appropriate for little walking robots, lifting mechanisms, and additional applications where high torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draft to some amps, making them ideal applicants for the DRV8833 motor driver carrier. Engine overheating can be due to excessive stalling, even at suprisingly low voltages. We advise that you use stall-detection sensors, or just look at your robot, to make sure that it doesn’t stall for more than a few seconds at the same time.
This gearbox has a 4 mm diameter, round output shaft, which works together with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also matches on small threaded end of the shaft, though it is not particularly designed to work with this kind of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors happen to be economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors arranged new criteria for reliability, performance and economy with unparalleled features including hollow shafts in the smallest sizes. An inverter friendly style offers easy integration now and a future proof alternative. The Ever-Power gear motor offers total flexibility in mounting choices includes shaft, base, face, and flange solutions. The electric motor terminal box could be mounted in choice positions rotated in 90º steps around the motor frame offering for unparalleled integration options.
Ever-Power gear motors adhere to North American and International criteria, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a genuine total alternative for our global clients.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose evidence,and can be used outdoors or in wet and dusty environments without the use of additional enclosures. Full rated output is available at the result shaft of the unit.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With integrated inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the alternative for applications requiring a good part turn, optional dual output, or an inability for the electric motor to be back again driven. The DC right angle gear motors are created for continuous and intermittent duty operation. Our right angle equipment reducers were created with many mounting plate choices, making them ideal for a number of DC engine based applications. You can expect 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ hours (varies by application)
EP Products Worm Equipment Motors are designed to generate high torque in a small package size. Worm Equipment Motors are excellent for applications that require a self- locking or breaking feature since the output shaft can’t rotate when there’s no power applied. Also, Worm Gearheads can transfer motion in 90 degrees. With various decrease ratios, precision cut gears, voltages and sizes, EP Items includes a DC Worm Equipment Motor solution for your application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Gear Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Devices / Security Gates / Teeth Seats / Ambulance Cots & Stretchers Many of our DC Motors can be complimented with among our Worm Gearheads. EP Products will work with you to design and produce a Worm Gear Motor that may optimize the performance of your unique application.
Built to your specific requirements
Electric motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Slash / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm motor uses a metal gear box for durability and a higher torque output. Due to the special mechanical structure of the worm drive the engine output shaft is definitely self locking and will not be rotated.
This part uses a two wire connection and supports direction control in addition to PWM speed control. Ranked voltage is 12v and can obtain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear devices from EP DRIVESYSTEMS especially display their power in applications where superior gear ratios are necessary. Our worm geared motors are as a result optimally suited for make use of in intralogistics, packaging technology and the food & beverage industry.
Four great known reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions enable simple and effective cleaning of the travel system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular style give users optimum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are numerous applications that require drive systems, and each one of these has its own unique requirements. The EP series worm gear motors could be quickly and effectively adapted to fulfill your needs.
Worm gear devices impress with their superior power density and compact design. If required, we are able to also supply them with the highly effective nsd tupH surface area treatment.
In addition to the basic EP casing, you can expect an extensive type of bolt-on parts to customize the merchandise including torque arms, shaft covers and output flanges. These can be easily field set up, but we may also be glad to assemble the average person components for you.
Discover more about the modular SI worm geared motors!
Find out more
Smooth and Clean: The EP worm gear unit SMI
SMI worm gear systems feature a clean, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface area conversion makes the product preferably 
suited for severe and challenging industries like meals processing and pharmaceuticals.
Adaptable input designs such as for example NEMA, IEC or direct motor mounts in additional foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared electric motor program. The units have on all sides several fixing possibilities and enable an easy assembling for the customer.
Various other drive configurationscan be created by use of built-on accessories (e.g. torque arm and output flanges). The housings are created in light weight building out of aluminium die cast. Engine attachment is realised generally through IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Engine – incorporating the next features: 1 to 6V voltage ranking, 17100 rpm simply no load swiftness, 220g-cm stall torque, 3mm shaft size, 60mm long, 35mm wide, 40mm high, a good robust worm drive gearbox powered by an MM28 motor (included), most ideal for applications where a simple to match, high torque outcome is necessary, nylon housing and equipment, requires light oil or silicon grease lubrication, well suited for student based tasks including robots and buggies.
Most suitable for applications where an easy to match, high torque output is required
Ideal for student based tasks including robots and buggies
Reversible Large torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible Substantial torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC electric motor with micro-turbine worm, you can transform the wiring-connection to improve motor rotation.
Turbo worm geared electric motor with self-lock, that’s, in the case of motor without electrical, the output axis is usually fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole engine output shaft relatively-short than general gear electric motor, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the windows, door, Mini winch. Ect.
In sumo robot or combat robot competition where substantial holding torque’s electric motor is essential in order to avoid your robot being pushed by your opponent robot. The worm gear is definitely a much better option when compared to spur gear motor. Why is worm gear so unique? Take a look wiki out: Worm Travel.
“Unlike with ordinary gear trains, the path of transmission (insight shaft vs result shaft) is not reversible when working with large reduction ratios, because of the better friction involved between the worm and worm-wheel, when usually an individual start (1 spiral) worm can be used. This can often be a advantage when it’s desired to remove any possibility of the result driving the input.”
In other terms, it is difficult to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g
